KEYENCE IV Series - Manual (Page 38)

2-6 - IV Series User's Manual (Monitor) -
Mounting the Sensor
Mounting the attachment
Using the dome attachment
Dome attachment can be used for the standard
range type and short range type sensor.
y Do not remove the front cover of the sensor.
y Use the dome attachment at a correct
installation distance. Failure to do so may lose
the effect of the dome attachment.
y Adjust the brightness with the dome attachment
mounted.
“Auto Brightness Adjustment” (Page 4-11)
y For the color type, adjust the white balance with
the dome attachment mounted.
“White Balance (for color type only)” (Page 6-41)
z „ Mounting the dome attachment
1
Mount the attachment by aligning the
concave part of the dome attachment with
the mounting screw of the front cover of
the sensor.
Concave part
Front cover
mounting screw
Concave part
Screw hole for
mounting the
attachment
2
Fix the dome attachment with attached
dedicated screws.
y Screw : Dedicated screw x 2
Use the attached dedicated screws.
y Tightening torque : 0.25 to 0.35 N·m
z „ Installed distance of the dome
attachment
62 to 112 mm from the front face of the sensor
(0 to 50 mm from the front face of the dome attachment)
Target
Installed distance
from the front face
of the sensor
(0 to 50 mm)
62 to 1
12 mm
Sensor type
y Standard range type
y Short range type
2
Installation and Connection