KEYENCE IV Series - Manual (Page 216)

6-40 - IV Series User's Manual (Monitor) -
Setting the Extended Functions of the Sensor
Rotate 180°
The image of a target may be rotated 180° and
displayed due to the installation restrictions of the
sensor and target. The rotate 180° function rotates
the image displayed on the monitor 180°.
Before rotate 180°
correction
After rotate 180°
correction
Indicator light
Target
1
Tap the [Sensor Advanced] button in the
Sensor Setup Menu screen.
2
Tap the [Setup Adjustment] button, and
then the [Rotate 180°] button.
3
Image a desired target.
If the quality of the taken image displayed on
the monitor is poor, tap the [Image Settings]
button to adjust the taken image.
The following adjustments can be performed.
y “Auto Brightness Adjustment” (Page 4-11)
y “Focus Adjustment” (Page 4-12)
y “Advanced Brightness Adjustment” (Page 4-18)
y “Lighting” (Page 4-18)
4
Tap the [ON] button.
The display of the monitor will be displayed with
the image rotated 180°.
5
Tap the [OK] button.
y After performing a rotate 180° correction, a
message prompting you to re-register the
master image appears.
Re-register the master image after the [OK]
button is tapped.
“2. Master Registration (Registering an
Image as a Reference for Judgment)”
(Page 4-20)
y If a tilt correction (Page 6-38) has also been
performed, confirm the tilt correction settings
after a rotate 180° correction.
The system returns to the Sensor Advanced screen.
6
Useful Features/V
arious Functions