KEYENCE IV Series User Manual
Page 161
5-27
- IV Series User's Manual (Monitor) -
Tool Auto Tuning (Automatically Adjusting the Judgment Condition)
4
Tap the [Use the previous registered image]
button.
Re-adjustment is performed by using the
previous registration information.
The information dialog appears.
5
Check the changes made by
the re-adjustment and tap the [OK] button.
Changed
settings
The registration menu screen for the Tool Auto
Tuning opens.
6
To add images, register the OK/NG images.
“Registering the OK/NG images to be used
for the Tool Auto Tuning” (Page 5-18)
7
After the registration is completed, tap the
[Save] button.
The confirmation dialog appears.
8
Tap the [OK] button.
The adjustment result is reflected and the
information dialog appears.
9
Tap the [OK] button.
By tapping the [Saving to the USB memory]
button, the result of Tool Auto Tuning can be
saved in the USB memory as a registration
information file and can be reused.
The system returns to the Sensor setup menu
screen.
5
Operating/Adjusting