Basler Electric DGC-2020 - Manual (Page 49)

● LOGIC CTL RELAYS
○ LCR X (X = 1 to 16)
● LSM INPUTS (Visible when LSM-2020 is enabled.)
○ SCALED
○ RAW
■ LSM IN
● ANALOG INPUTS (Visible when AEM-2020 is enabled.)
○ SCALED
■ ALG IN X (X = 1 to 8)
○ RAW
■ ALG IN X (X = 1 to 8)
● THERMAL INPUTS (Visible when AEM-2020 is enabled.)
○ SCALED
■ RTD IN X (X = 1 to 8)
■ THRM CPL X (X = 1 to 2)
○ RAW
■ RTD IN X (X = 1 to 8)
■ THRM CPL X (X = 1 to 2)
● ANALOG OUTPUTS (Visible when AEM-2020 is enabled.)
○ SCALED
■ ALG OUT X (X = 1 to 4)
○ RAW
■ ALG OUT X (X = 1 to 4)
● ANALOG STATUS (Visible when AEM-2020 is enabled.)
● CONF ELEMENTS
○ CONFIG ELEMENT X (X = 1 to 8)
● CONF PROT STATUS
● EVENT LOG
○ [EVENT NAME]
■ ACTIVE
■ OCCURRENCE COUNT
■ FIRST DATE
■ FIRST TIME
■ LAST DATE
■ LAST TIME
■ FIRST ENG HRS
■ LAST ENG HRS
■ DETAILS
□ OCCURRENCE (Use the Edit/Up/Down keys to change the occurrence.)
□ DATE
□ TIME
□ ENG HRS
■ CLEAR EVENT (Visible when logged in through the front panel.)
● J1939 DATA (Visible when CAN bus is enabled and ECU is configured for Standard, Volvo Penta, MTU ADEC,
GM/Doosan, Cummins, Scania, or John Deere.)
○ THROTTLE POSITN
○ LOAD @ CRNT RPM
○ ACTUAL ENG TORQ
○ ENGINE SPEED
○ INJ CNTRL PRESS
○ INJ RAIL PRS
○ ENGINE HOURS
○ TRIP FUEL
○ TOTAL FUEL USED
○ ENG COOLANT TEMP
○ FUEL TEMP
○ ENG OIL TEMP
○ ENG INTCLR TEMP
○ FUEL DELV P
○ ENG OIL LEVEL
○ ENG OIL PRESS
○ COOLANT PRESS
○ COOLANT LEVEL
○ FUEL RATE
○ BAROMETRIC PRESS
○ AMB AIR TEMP
○ AIR INLET TEMP
9400200990 Rev X DGC-2020 Human-Machine Interface 2-9