Basler Electric DGC-2020 - Manual (Page 60)

○ LOW FUEL LEVEL
■ ENABLE
■ THRESHOLD
■ ACTIVATN DLY
○ OVERSPEED
■ ENABLE
■ THRESHOLD
■ ACTIVATN DLY
○ COOLANT LEVEL (Visible when CAN bus is enabled.)
■ ENABLE
■ THRESHOLD
NOTE
The HIGH COOLANT TEMP and LOW OIL PRESSURE alarms have an
ARMING DELAY setting that disables the alarm for the specified time after
engine startup.
● SENDER FAIL
○ COOL TEMP SENDR FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ OIL PRESS SENDR FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ FUEL LEVL SENDR FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ VOLTAGE SENSE FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ SPEED SENDR FAIL
■ TIME DELAY
GENERATOR PROTECTION
● 27 UNDERVOLTAGE
○ 27-1 / 27-2
■ LOW LINE SF (Visible when an input is selected for the Low Line Override programmable
function.)
■ 3 / 1 PHASE SETTINGS
□ PICKUP
□ HYSTERESIS
□ TIME DELAY
□ FREQ INHIBIT
□ ALARM CONFIG
● 59 OVERVOLTAGE
○ 59-1 / 59-2
■ LOW LINE SF (Visible when an input is selected for the Low Line Override programmable
function.)
■ 3 / 1 PHASE SETTINGS
□ PICKUP
□ HYSTERESIS
□ TIME DELAY
□ ALARM CONFIG
● 47 PHASE IMBALANCE (Optional)
○ PICKUP
○ HYSTERESIS
○ TIME DELAY
○ ALARM CONFIG
○ LOW LINE SF (Visible when an input is selected for the Low Line Override programmable function.)
● 81 O/U FREQUENCY
○ UNDERFREQUENCY
■ INHIBIT VOLTS
■ PICKUP
2-20 DGC-2020 Human-Machine Interface 9400200990 Rev X