Install the off-valve -18, Arc voltage connection -33 – Hypertherm HSD130 HySpeed Plasma User Manual
Page 101
Advertising
![background image](/files/789751/content/doc101.png)
INSTALLATION
HySpeed HSD130 RHF
Instruction Manual
3-33
Arc voltage connection
If a torch height control is installed, and undivided arc voltage (0 to 311 VDC) is needed, it can be accessed by making
the connections shown in the figure on this page. The cables in the figure terminate at a voltage divider (supplied by the
torch height control manufacturer).
(+)
(—)
Advertising