Hypertherm HSD130 HySpeed Plasma - Manual (Page 90)

INSTALLATION
3-22 HySpeed HSD130 RHF Instruction Manual
– Fuel gas console to power supply connections
Before connections from the power supply to the fuel-gas console are made, the standard air hose must be removed
from the power supply.
1. Remove and discard the standard air hose.
2. The air hose for the power supply to the fuel-gas console connection is supplied with the fuel-gas console. Connect
the hose (024819) from the air filter on the power supply to the air inlet on the fuel-gas console.
1f 1b
Remove the
standard
air hose
Install the
fuel-gas
air hose
The air supply
line must be
connected
here