Hypertherm HSD130 HySpeed Plasma User Manual
Page 98
Advertising
INSTALLATION
3-30
HySpeed HSD130 RHF
Instruction Manual
5. Connect the shield gas hose.
6. Connect the plasma gas hose. This connection has left-hand threads.
7. Connect the pilot arc lead.
Note:
Be careful not to damage or remove the small slotted metal band at the end of the pilot arc cable
7a. Pull the sleeve back until the connector is exposed.
7b. Screw the connector onto the pilot arc connection from the torch. Tighten by hand until it is firmly seated.
Advertising