Hypertherm HSD130 HySpeed Plasma - Manual (Page 82)

INSTALLATION
3-14 HySpeed HSD130 RHF Instruction Manual
Install the ignition console
• Mount the ignition console on the gantry (bridge).
• Allow room to remove the top for servicing.
B
7 mm
.028"
(4 places)
32 mm
1.25"
32 mm
1.25"
184 mm
7.25"
279 mm
11.00"
248 mm
9.75"
216 mm
8.50"
Note: verify the hose orientation before running the coolant hoses. The fittings are different on the ignition
console end and the power supply end of each hose. The label marked IGN CSL on the end of each
hose indicates that it is the end that is connected to the ignition console.