Hypertherm HSD130 HySpeed Plasma - Manual (Page 168)

MAINTENANCE
5-22 HySpeed HSD130 RHF Instruction Manual
2 3 4 5
Coolant system filter replacement
1. Make sure that the coolant has been drained and then turn OFF all power to the system.
2. Remove housing.
3. Remove and discard the filter element.
4. Install the new filter element 027664.
5. Re-install housing.
6. Refill the power supply with coolant.
Caution: Coolant will flow from the filter when its housing is removed.
Drain coolant before replacing the filter.