NavCom StarUtil-3000 Rev.A - Manual (Page 109)

StarUtil-3000 User Guide – Rev A
NMEA Tab
The SF-3050 does not output NMEA messages by default. They must be scheduled by the user
via a user profile or the Input Terminal window.
Figure 128: NMEA Tab
 Click the NMEA option on the Detailed Views menu to open the NMEA tab (see Figure 128).
The tab displays the NMEA messages scheduled on the port that StarUtil-3000 is
connected.
How to Schedule NMEA Messages
NMEA messages are scheduled using the [OUTPUT] command, as in the examples below.
 [OUTPUT] NMEAGGA
Outputs GGA messages on the current port using default values, or the current profile
values for timing and interval.
 [OUTPUT] NMEAGGA,ONTIME,.2,2
Outputs GGA messages ONTIME at 5Hz on Port 2. The keyword mnemonic, ONTIME,
outputs the message at a rate
 the purchased rate.

Refer to the Sapphire Technical Reference Manual (TRM) for detailed
information on the output formats of NMEA messages and NavCom proprietary
NMEA type messages (see Related Documents in the fore-matter). In addition,
refer to the section, NMEA Messages Overview, in the TRM.
9-107