NavCom StarUtil-3000 Rev.A - Manual (Page 35)

StarUtil-3000 User Guide – Rev A
Basic Ethernet Configuration: Direct Connection Via Static IP Address
Setup
This setup uses the factory default IP address of the SF-3050:
192.168.0.2,255.255.255.0,0.0.0.0
2-33
The PC IP address is set manually in Windows.
1. Connect the Positronic 9-Pin connector of the Ethernet cable (P/N 94-310265-3006LF) to
COM1 - LAN of the SF-3050. Connect the RJ45 plug end to the computer.
2. In Windows, right click on My Network Places and select Properties from the pop-up menu.
The Network Connections window opens.
3. Right click on Local Area Connection (or the equivalent) and click Properties from the
pop-up menu. The Local Area Connection window opens.
4. Click on Internet Protocol (TCP/IP). See Figure 39.
IP Address Network Mask Gateway
Figure 39: Local Area Connection Window
5. Click the Properties button. The Internet Protocol window opens.