NavCom StarUtil-3000 Rev.A - Manual (Page 69)

StarUtil-3000 User Guide – Rev A
4. Click the Delete button (see Figure 85).
5. Click OK on the confirmation box.
 Perform these steps to delete all profiles stored in the receiver
Figure 87: Delete All User Profiles
Refer to Figure 87 for the steps below:
6-67
1. Select Delete Profile.
2. Check the box next to Delete All PROFILEs.
3. Click the Delete button.
4. Click OK on the confirmation box. The PROFILE in use changes to the factory default,
NONE (see Figure 88).
Figure 88: Profile In Use: NONE
Verify Profile In Use
 Click the Retrieve button at the bottom of the Save/Load/Delete User Profile window. The
loaded user profile appears in the PROFILE in use field (see Figure 89).
Figure 89: Profile In Use