NavCom StarUtil-3000 Rev.A - Manual (Page 43)

StarUtil-3000 User Guide – Rev A
2. Select GNSS Receiver Firmware in the File Upload window (see Figure 51).
Figure 51: File Upload Window – GNSS Receiver Firmware
3. Click the button. The Load Receiver Firmware window opens (see Figure 52).
Figure 52: Load Receiver Firmware Window
4. Click the button.
5. Browse to NavCom\Firmware on the PC or USB flash drive (see Figure 53).
Figure 53: Firmware Folder
6. Select the appropriate firmware file.
Upload Boot files before application files if both types require updating.
Example Boot File: SP_boot2_ver1,0,4.s19

The format of the NAV firmware file is:
SPv + version number.s19
Example NAV File: SPv1,0,0,4.s19
3-41