NavCom StarUtil-3000 Rev.A - Manual (Page 41)

StarUtil-3000 User Guide – Rev A
2. Enlarge the Input Terminal window by dragging the top edge of the window up.
3. Type [VERSION] in the field at the bottom of Input Terminal (see Figure 47).
Figure 47: Version Command
4. Click the Send button. The receiver returns a list of the currently installed firmware.

The firmware is identified by version number. For example, the NAV firmware
displayed in Figure 48 is version 01.00.00.003.
NAV Firmware Version
Figure 48: Example of Installed Firmware
5. Browse to NavCom\Firmware on the PC (see to Figure 1). The Firmware folder contains the
most current firmware. The firmware file extension is *.s19.
6. Compare the current NAV Firmware version in the Firmware folder with the installed version
displayed in the Input Terminal window (see Figure 49).

In the example below, the NAV firmware in the Firmware folder is more current than
the installed firmware. As a result, the user must update the NAV firmware in the
receiver.
3-39
Current NAV Firmware Old NAV Firmware
Figure 49: Comparing Current & Installed Firmware