Figure 41: ethernet port configuration – NavCom StarUtil-3000 Rev.A User Manual
Page 37
Advertising
StarUtil-3000 User Guide – Rev A
Figure 41: Ethernet Port Configuration
4. Click
the
Connect button.
5. Verify that the SF-3050 is connected to the PC. Messages scrolling in the Communication
window indicate that the connection is established (see Figure 30).
If an Ethernet connection is not established, use StarUtil-3000 to verify the IP
address of the SF-3050. A serial connection must be used to determine the
receiver’s IP address.
2-35
Advertising