NewTek TriCaster Advanced Edition User Guide - Manual (Page 238)

Page | 226
POS/SCALE
 Move the joystick horizontally, vertically or diagonally (as viewed from above) to move delegated
video source(s) on its X and Y axes.
 Twist the joystick clockwise to scale delegated source(s) up, or counter-clockwise to scale down.
Hint: When multi-delegate selections are active for the Positioner, adjustments are generally relative to the current
state for individual delegates, as opposed to absolute.
ROT (R OTATE )
 Move the joystick horizontally (as viewed from above) to rotate delegated sources on the Y axis.
 Move the joystick vertically to rotate delegated sources on the X axis.
 Twist the joystick clockwise/counter-clockwise to rotate delegated sources on the Z axis.
CROP
 Twist the joystick clockwise (as viewed from above) to crop delegated sources inward on all four
edges, maintaining the original aspect ratio.
 Twist the joystick counter-clockwise to reduce cropping of delegated sources on all 4 edges.
 Move the joystick horizontally to crop only the left edge of delegated sources.
 Move the joystick horizontally with the joystick button pressed to crop only the right edge of delegated
sources.
 Move the joystick vertically to crop only the top edge of delegated sources.
 Move the joystick vertically with the joystick button pressed to crop only the bottom edge of delegated
sources.
RESET
Despite its location, RESET is really an action button (not a Joystick mode). Press it to restore all position
settings for currently delegated source(s) to their defaults. (This is also why RESET does not stay selected
when pressed, nor does it change the current Joystick mode.
The two special delegate selections also work differently with RESET:
 When VIRTUAL ZOOM is delegated, the LiveSet preset for delegated M/Es) is reset to the #1 preset.
 When SHUTTLE is delegated, selected Media Players are reset to the starting point of the current item
(or playlist).