Ection, Aster – NewTek TriCaster Advanced Edition User Guide User Manual
Page 333
Advertising
Page | 321
FIGURE 347
SECTION 22.15
TRICASTER 460 CS
FIGURE 348
Normally, the 460 CS is used in a table-top configuration. Otherwise, a rabbet on all four sides permits you
to embed the base in a cutout prepared for the purpose.
At the sides, a ½” (1.2 cm) ledge is formed for this purpose. The overlap provided front and back is narrower,
about 5/16” (.31 cm).
Advertising