Grass Valley iControl V.6.02 User Manual
Page 234
Advertising
![background image](/files/813500/content/doc234.png)
Configuring Devices & Services
Adding a Card to the Reference Configuration
224
To add a card to the reference configuration
• In iC Navigator, right-click the card you wish to add, and then click Add to reference
configuration.
The phrase In Ref Configuration appears in the Config Status column.
REQUIREMENT
Before beginning this procedure, make sure you have opened iC Navigator (see
).
Note: If this card is physically removed from its slot, the card name remains in the
Label column, along with the phrase Missing from slot.
Advertising
This manual is related to the following products: