Grass Valley iControl V.6.02 User Manual
Page 76
Advertising
![background image](/files/813500/content/doc076.png)
Getting Started with iControl
Configuring an Application Server’s Date and Time
66
To synchronize an Application Server’s time to an NTP server
1. On the iControl—Date and Time page, in the Time zone area, select the desired time zone
from the list, and then click Save.
2. If you would like to synchronize your Application Server’s time to a remote NTP server,
perform the following sub-steps:
a) In the Time settings area, enable NTP synchronization.
The NTP server IP address field appears.
Advertising
This manual is related to the following products: