Grass Valley iControl V.6.02 - Manual (Page 405)

iControl
User Guide
395
Creating an Alarm with a MIB Element Shortcut Menu
To create an alarm with a MIB element shortcut menu
1. In SNMP Driver Creator, click on the SNMP driver configuration tab in the main pane.
2. In the MIB Browser pane, right-click the desired MIB node from the loaded MIB modules,
point to Add to table, and then click Add as an Alarm.
The Add Alarm window appears, displaying relevant information about the MIB node.
3. Modify the alarm parameters as required.
The parameters are as follows:
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened SNMP Driver Creator (see page 578 ).
• You have loaded a MIB module into SNMP Driver Creator (see page 390 ).
• You have configured your driver settings (see page 393 ).
• [RECOMMENDED]: You are performing this procedure as a task within the context of an
approved workflow (see "[Workflow]: Creating an SNMP Driver" , on page 379).
Parameter Description
MIB The MIB where the OID was retrieved from
MIB variable name The label of the MIB node
OID The object identifier (OID) value of the MIB node
GSM name The name to be shown on the GSM for this alarm
Type The type of alarm (status, text, or both). For more information about alarm types, see page 298 .
Mode The mode of the alarm