Grass Valley iControl V.6.02 - Manual (Page 363)

iControl
User Guide
353
4. Type a name for the new virtual alarm.
5. Type a path in which the virtual alarm will appear.
6. Click Edit Metadata.
The Virtual Alarm MetaData window appears.
7. In the Source ID box, type a meaningful identifier string to distinguish this virtual alarm’s
sub-alarms from other alarms.
8. If desired, fill in the other boxes of the Virtual Alarm Metadata window.
9. Click OK in the Virtual Alarm MetaData window.
10. Click OK in the Build Virtual Alarm window.
The Build Virtual Alarm window disappears.
Modifying a Virtual Alarm
Note: The path of the virtual alarm can be anywhere you choose. You can select an
alarm folder, and then click Use selected folder as path.
REQUIREMENT
Before beginning this procedure, make sure you have opened the GSM Alarm Browser for
the appropriate GSM (see
page 577 ).