Oup (see, P (see, Er (see – Grass Valley iControl V.6.02 User Manual
Page 569: Ge (see, Opening the icontrol—redundancy configuration page
iControl
User Guide
559
Opening the iControl—Redundancy configuration Page
Use this procedure to display and configure Application Server redundancy settings.
To open the iControl—Redundancy configuration page
• On the iControl—admin page, click Redundancy configuration, under System settings.
The iControl—Redundancy configuration page appears.
If a Redundancy Group already exists, the form looks like this.
Note: If you have not yet activated any licenses through iControl’s License
Management feature, you will see a notice on the iControl—Startup page indicating
there are options or drivers whose licenses are pending activation. This notice will
disappear after the first time you activate a license.
REQUIREMENT
Before beginning this procedure, make sure you have opened the iControl—admin page on
the Application Server for which you would like to configure redundancy (see
).