HEIDENHAIN TNC 640 (34059x-05) - Manual (Page 627)

Setting up data interfaces 18.10
18
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 1/2015
627
Settings for data transfer with the TNCserver PC
software
Enter the following settings in the user parameters
(
serialInterfaceRS232 / definition of data blocks for the serial
ports / RS232 ):
Parameters Selection
Data transfer rate in baud Has to match the setting in
TNCserver
Data transmission protocol BLOCKWISE
Data bits in each transferred
character 7 bits
Type of parity checking EVEN
Number of stop bits 1 stop bit
Specify type of handshake: RTS_CTS
File system for file operations FE1