HEIDENHAIN TNC 640 (34059x-05) - Manual (Page 629)

Setting up data interfaces 18.10
18
TNC 640 | User's Manual
HEIDENHAIN Conversational Programming | 1/2015
629
Data transfer software
For transfer of files to and from the TNC, we recommend using the
HEIDENHAIN TNCremo data transfer software. With TNCremo,
data transfer is possible with all HEIDENHAIN controls via the serial
interface or the Ethernet interface.
You can download the current version of TNCremo
free of charge from the HEIDENHAIN Filebase
(www.heidenhain.de, <Documentation and
Information>, <Software>, <Download area>, <PC
Software>, <TNCremo>).
System requirements for TNCremo:
PC with 486 processor or higher
Windows XP, Windows Vista, Windows 7, Windows 8 operating
system
16 MB RAM
5 MB free memory space on your hard disk
An available serial interface or connection to the TCP/IP network
Installation under Windows
Start the SETUP.EXE installation program with the file manager
(Explorer)
Follow the setup program instructions
Starting TNCremo under Windows
Click on <Start>, <Programs>, <HEIDENHAIN Applications>,
<TNCremo>
When you start TNCremo for the first time, TNCremo automatically
tries to set up a connection with the TNC.