56 processing element features car (pe_feat), 1010h, Section 5.56 – Texas Instruments TMS320TCI648x User Manual

Page 186

Advertising
background image

www.ti.com

5.56 Processing Element Features CAR (PE_FEAT)

SRIO Registers

The processing element features CAR (PE_FEAT) is shown in

Figure 119

and described in

Table 127

.

Figure 119. Processing Element Features CAR (PE_FEAT) - Address Offset 1010h

31

30

29

28

27

24

BRIDGE

MEMORY

PROCESSOR

SWITCH

Reserved

R-0

R-0

R-1

R-0

R-0h

23

16

Reserved

R-00h

15

8

Reserved

R-00h

7

6

5

4

3

2

0

FLOW_

RETRANSMIT_

CRF_

LARGE_

EXTENDED_

CONTROL_

EXTENDED_ADDRESSING_SUPPORT

SUPPRESS

SUPPORT

SUPPORT

FEATURES

SUPPORT

R-0

R-0

R-0

R-0

R-1

R-001

LEGEND: R = Read only; -n = Value after reset

Table 127. Processing Element Features CAR (PE_FEAT) Field Descriptions

Bit

Field

Value

Description

31

BRIDGE

PE can bridge to another interface. Examples are PCI,
proprietary processor buses, DRAM, etc.

30

MEMORY

PE has physically addressable local address space and can be
accessed as an endpoint through non-maintenance (i.e.,
non-coherent read and write) operations. This local address
space may be limited to local configuration Registers, or could be
on-chip SRAM, etc.

29

PROCESSOR

PE physically contains a local processor or similar device that
executes code. A device that bridges to an interface that
connects to a processor does not count (see bit 31).

28

SWITCH

PE can bridge to another external RapidIO interface. An internal
port to a local endpoint does not count as a switch port. For
example, a device with two RapidIO ports and a local endpoint is
a two port switch, not a three port switch, regardless of the
internal architecture.

27–8

Reserved

0

These read-only bits return 0s when read.

7

FLOW_CONTROL_SUPPORT

PE supports congestion flow control mechanism

0

PE does not support flow control

1

PE supports flow control

6

RETRANSMIT_SUPPRESS

PE supports suppression of error recovery on packet CRC errors.

0

PE does not support suppression

1

PE supports suppression

5

CRF_SUPPORT

This bit indicates PE support for the Critical Request Flow (CRF)
Function.

0

PE does not support CRF Function

1

PE supports CRF Function

4

LARGE_SUPPORT

Support of common transport large systems.

0

PE does not support common transport large systems

1

PE supports common transport large systems

3

EXTENDED_FEATURES

PE has extended features list; the extended features pointer is
valid.

186

Serial RapidIO (SRIO)

SPRUE13A – September 2006

Submit Documentation Feedback

Advertising