Texas Instruments TMS320TCI648x - Manual (Page 213)

www.ti.com
SRIO Registers
Table 152. Logical/Transport Layer Error Enable CSR (ERR_EN) Field Descriptions (continued)
Bit Field Value Description
24 PKT_RESP_TIMEOUT_ENABLE Packet response time-out error reporting enable
0 Disable reporting of a packet response time-out error.
1 Enable reporting of a packet response time-out error (endpoint
device only). Save and lock original request address in
Logical/Transport Layer Address Capture CSRs. Save and lock
original request Destination ID in Logical/Transport Layer Device ID
Capture CSR.
23 UNSOLICITED_RESP_ENABLE Unsolicited response error reporting enable
0 Disable reporting of an unsolicited response error.
1 Enable reporting of an unsolicited response error (switch or endpoint
device). Save and lock transaction capture information in
Logical/Transport Layer Device ID and Control Capture CSRs.
22 UNSUPPORTED_TRANS_ENABLE Unsupported transaction error reporting enable
0 Disable reporting of an unsupported transaction error.
1 Enable reporting of an unsupported transaction error (switch or
endpoint device). Save and lock transaction capture information in
Logical/Transport Layer Device ID and Control Capture CSRs.
21–8 Reserved 0 These read-only bits return 0s when read.
7 RX_CPPI_SECURITY_ENABLE RX CPPI security error reporting enable
0 Disable reporting of an attempt at unauthorized access to a RX
queue.
1 Enable reporting of attempt at unauthorized access to a RX queue.
Save and Lock capture information in appropriate Logical/Transport
Layer Capture CSRs.
6 RX_IO_SECURITY_ENABLE RX I/O secuirty error reporting enable
0 Disable reporting of attempt at unauthorized access to a memory
location.
1 Enable reporting of attempt at unauthorized access to a memory
location. Save and Lock capture information in appropriate
Logical/Transport Layer Capture CSRs.
5–0 Reserved 0 These read-only bits return 0s when read.
SPRUE13A – September 2006 Serial RapidIO (SRIO) 213
Submit Documentation Feedback