Texas Instruments TMS320TCI648x User Manual
Page 222
www.ti.com
SRIO Registers
Table 161. Port Error Rate Enable CSR n (SPn_RATE_EN) Field Descriptions (continued)
Bit
Field
Value
Description
19
PKT_UNEXPECTED_ACKID_EN
Rate counting enable for packets with unexpected ackIDs
0
Disable error rate counting of packets with
unexpected/out-of-sequence ackIDs
1
Enable error rate counting of packets with
unexpected/out-of-sequence ackIDs.
18
RCVED_PKT_WITH_BAD_CRC_EN
Rate counting enable for packets with bad CRC
0
Disable error rate counting of packets with a bad CRC values.
1
Enable error rate counting of packets with a bad CRC values.
17
RCVED_PKT_OVER_276B_EN
Rate counting enable for oversize packets
0
Disable error rate counting of packets that exceed the maximum
allowed size.
1
Enable error rate counting of packets that exceed the maximum
allowed size.
16–6
Reserved
0
These read-only bits return 0s when read.
5
NON_OUTSTANDING_ACKID_EN
Rate counting enable for non-outstanding ackIDs
0
Disable error rate counting of link-responses received with an
ackID that is not outstanding.
1
Enable error rate counting of link-responses received with an
ackID that is not outstanding.
4
PROTOCOL_ERROR_EN
Rate counting enable for protocol errors
0
Disable error rate counting of protocol errors.
1
Enable error rate counting of protocol errors.
3
Reserved
0
This read-only bit returns 0 when read.
2
DELINEATION_ERROR_EN
Rate counting enable for delineation errors
0
Disable error rate counting of delineation errors.
1
Enable error rate counting of delineation errors.
1
UNSOLICITED_ACK_CNTL_SYM_EN
Rate counting enable for unsolicited acknowledge control symbols
0
Disable error rate counting of unsolicited acknowledge control
symbols.
1
Enable error rate counting of unsolicited acknowledge control
symbols.
0
LINK_TIMEOUT_EN
Rate counting enable for link time-out errors
0
Disable error rate counting of link timeout errors.
1
Enable error rate counting of link timeout errors.
Serial RapidIO (SRIO)
222
SPRUE13A – September 2006