Texas Instruments TMS320TCI648x - Manual (Page 69)

www.ti.com
2.3.9.1 Translation for MMR space
A0 A0 A2 A2 A1 A1 A3 A3 L2 offset 0x0 DSP defined MMR
offset 0x1000
Byte
lane 0
31
Byte
lane 3
DMA 32b
0
2.3.9.2 Endian Conversion (TMS320TCI6482)
RapidIO defined bit positions
A0 A1 A2 A3
31 0
MMR offset 0x0000
B0 B1 B2 B3 MMR offset 0x0004
C0 C1 C2 C3 MMR offset 0x0008
D0 D1 D2 D3 MMR offset 0x000C
RapidIO
defined
MMR
offsets
A0A1A2A3B0B1B2B3 C0C1C2C3D0D1D2D3 Header fields
Type 8
Response
A0 A1 A2 A3
Byte
address 3
Byte Byte
address 0
L2 offset 0x0
B0 B1 B2 B3 L2 offset 0x4
C0 C1 C2 C3 L2 offset 0x8
D0 D1 D2 D3 L2 offset 0xC
Big Endian Little Endian
A3 A2 A1 A0
Byte
address 0 address 3
L2 offset 0x0
B3 B2 B1 B0 L2 offset 0x4
C3 C2 C1 C0 L2 offset 0x8
D3 D2 D1 D0 L2 offset 0xC
Double-word0 Double-word1
The desired operation is to send a Type 8 maintenance request to an external device.
The goal is to read 16B of RapidIO MMR
from an external device, starting offset 0x0000.
This operation involves the LSU block and utilizes the DMA for transferring the response
packet payload.
SRIO Functional Description
There are no Endian translation requirements for accessing the local MMR space. Regardless of the
device memory Endian configuration, all configuration bus accesses are performed on 32-bit values at a
fixed address position. The bit positions in the 32-bit word are defined by this specification. This means
that a memory image which will be copied to a MMR is identical between Little Endian and Big Endian
configurations. Configuration bus reads are performed in the same manner.
Figure 30 illustrates the
concept. The desired operation is to locally update a serial RapidIO MMR (offset 1000h) with a value of
A0A1A2A3h, using the configuration bus.
Figure 30. Configuration Bus Example
When accessing RapidIO defined MMR within an external device, RapidIO allows 4 bytes, 8 bytes, or any
multiple of a double-word access (up to 64 bytes) for type 8 (maintenance) packets. The peripheral only
supports 4-byte accesses as the target, but can generate all sizes of request packets. RapidIO is defined
as Big Endian only, and has double-word aligned Big Endian packet payloads.
The DMA, however, supports byte wide accesses. The peripheral performs Endian conversion on the
payload if Little Endian is used on the device. This conversion is not only applicable for type 8 packets, but
is also relevant for all outgoing payloads of NWRITE, NWRITE_R, SWRITE, NREAD, and message
packets. This means that the memory image is different between Little Endian and Big Endian
configurations, as shown in
Figure 31 .
Figure 31. DMA Example
SPRUE13A – September 2006 Serial RapidIO (SRIO) 69
Submit Documentation Feedback