Texas Instruments TMS320TCI648x - Manual (Page 194)

www.ti.com
5.63 Host Base Device ID Lock CSR (HOST_BASE_ID_LOCK)
SRIO Registers
See Section 2.4.2 of the RapidIO Common Transport Specification for a description of this register. It
provides a lock function that is write-once/reset-able. The host base device ID lock CSR
(HOST_BASE_ID_LOCK) is shown in
Figure 126 and described in Table 134 .
Figure 126. Host Base Device ID Lock CSR (HOST_BASE_ID_LOCK) - Address Offset 1068h
31 16 15 0
Reserved HOST_BASE_DEVICEID
R-0000h R/W-FFFFh
LEGEND: R/W = Read/Write; R = Read only; -n = Value after reset
Table 134. Host Base Device ID Lock CSR (HOST_BASE_ID_LOCK) Field Descriptions
Bit Field Value Description
31–16 Reserved 0000h These read-only bits return 0s when read.
15–0 HOST_BASE_DEVICEID 0000h–FFFFh This is the base ID for the Host PE that is initializing this PE.
Serial RapidIO (SRIO) 194 SPRUE13A – September 2006
Submit Documentation Feedback