3 standards, 4 external devices requirements, 5 ti devices supported by this document – Texas Instruments TMS320TCI648x User Manual
Page 20: Standards, Requirements, Document
www.ti.com
1.3
Standards
1.4
External Devices Requirements
1.5
TI Devices Supported By This Document
Overview
Features Not Supported:
•
Compliance with the Global Shared Memory specification (GSM)
•
8/16 LP-LVDS compatible
•
Destination support of RapidIO Atomic Operations
•
Simultaneous mixing of frequencies between 1x ports (all ports must be the same frequency)
•
Target atomic operations (including increment, decrement, test-and-swap, set, and clear) for internal
L2 memory and registers
The SRIO peripheral is compliant to V1.2 of the RapidIO Interconnect Specification and V1.2 of the
RapidIO Physical Layer 1x/4x LP-Serial Specification. These and the various associated documents listed
herein can be found at the official RapidIO website:
www.RapidIO.org
.
SRIO provides a seamless interface to all devices which are compliant to V1.2 of the RapidIO Physical
Layer 1x/4x LP-Serial Specification. This includes ASIC, microprocessor, DSP, and switch fabric devices
from multiple vendors. Compliance to the specification can be verified with bus-functional models available
through the RapidIO Trade Association, as well as test suites currently available for licensing.
Table 1. TI Devices Supported By This Document
Number of
Number of
Number of
SRIO Module
Device
DSP Cores (CPUs)
Ports
Lanes
Configurations
Frequency
TMS320TCI6482
1
4
4
1x/4x, 1x/1x
DSP frequency
÷
4
Serial RapidIO (SRIO)
20
SPRUE13A – September 2006