Document Outline

• Contents
• The operating instructions
• 2 Intended Use
  • 2.1 Restrictions
  • 2.2 Anticipated misuse
• 3 General Safety Instructions
• 4 General Information
  • 4.1 Scope of Delivery
  • 4.2 Warranty Regulations
  • 4.3 Certifications
  • 4.4 Information in the Internet
• 5 Abbreviations
  • 5.1 Abbreviations in Software and Documentation
  • 5.2 Display of the units
• 6 Technical Data
  • 6.1 Technical Specifications
  • 6.2 Type Plate – Example
  • 6.3 Hardware Structure
  • 6.4 Module Overview
• 7 Installation
  • 7.1 Safety Notes
  • 7.2 Quick Start Guide
  • 7.3 Mechanical Installation
  • 7.4 Electrical Connections
  • 7.5 Terminal Strip Pin Assignment
    • 7.5.1 Power Supply (PS)
    • 7.5.2 Instrumentation Supply (IS)
  • 7.6 Download of a Configuration and Parameter File
• 8 Description of Human-Machine Interface
  • 8.1 Safety Notes
  • 8.2 Operating and Display Elements
  • 8.3 Operation Mode
    • 8.3.1 Automatic & Manual Mode Key
    • 8.3.2 Automatic Mode (LED on)
    • 8.3.3 Manual Mode (LED off)
  • 8.4 Layout of Menu Screens
• 9 Menu Structure
  • 9.1 Principle of Menu Tree Structure
  • 9.2 Setting Numeric Values
• 10 Password Protection
• 11 General Software Concept and Functions
  • 11.1 Functional Overview
  • 11.2 Up- and Downloading of Configuration/Para meter Files
    • 11.2.1 Download
    • 11.2.2 Upload
  • 11.3 Data Logging
    • 11.3.1 Selection of SD card size for Data Logging purposes
    • 11.3.2 Start of Data Logging (enabling)
    • 11.3.3 Stop of Data Logging (disabling)
  • 11.4 Configuration and Parameterization
    • 11.4.1 Preface about Configuration/Parameterisation
    • 11.4.2 Operating Language
    • 11.4.3 Factory Setting of Parameters and Factory Reset
  • 11.5 Communication
    • 11.5.1 USB
    • 11.5.2 Ethernet (only devices with Ethernet option)
    • 11.5.3 (Remote) Device access via PC-Tool
• 12 Inputs
  • 12.1 Digital Inputs
    • 12.1.1 Binary Inputs
    • 12.1.2 Frequency Inputs
    • 12.1.3 Pulse Counter Inputs
  • 12.2 Analog Inputs
    • 12.2.1 4…20 mA Inputs
    • 12.2.2 Pt100 Inputs
• 13 Outputs
  • 13.1 Relay Outputs
    • 13.1.1 Relay as Binary Output (On/Off)
    • 13.1.2 Relay as PFM Output
    • 13.1.3 Relay as PWM Output
    • 13.1.4 Configuration (CodeLevel: Specialist)
  • 13.2 Analog 4...20 mA Outputs (Option)
  • 13.3 Transistor Outputs (Option)
    • 13.3.1 Transistor output as On/Off-Output
    • 13.3.2 Transistor output as PFM Output
    • 13.3.3 Transistor output as PWM Output
    • 13.3.4 Transistor output as fast PWM Output
    • 13.3.5 Configuration (Code Level: Specialist)
• 14 Controller Modules
  • 14.1 Common Settings
    • 14.1.1 Automatic and Manual Mode
    • 14.1.2 Definitions for “Inversion” and “All Timers”
    • 14.1.3 System Switch override function (Specialist level)
    • 14.1.4 Flow Switch override function (Specialist level)
    • 14.1.5 Maximum Output Timer (MOT)
  • 14.2 General PID controller (COMMON_PID)
  • 14.3 Conductivity Control Modules
    • 14.3.1 On-/Off-Control (COND_CONTROL)
    • 14.3.2 PI-Control (COND_PI)
    • 14.3.3 On-/Off-Ratio Control (COND_CONTROL_RATIO)
    • 14.3.4 PI-Ratio Control (COND_PI_RATIO)
  • 14.4 Corrosion Display (CORROSION-DISPLAY)
  • 14.5 pH Controller Modules (PH_ACID_CAUS) and (PH_ACID_OR_CAUS)
    • 14.5.1 pH-Control (PH_ACID_CAUS)
    • 14.5.2 pH Control (PH_ ACID_OR_CAUS)
  • 14.6 Dosing of oxygen absorption media
    • 14.6.1 Flow and temperature-based dosing (O2_SCAV_CTRL_RATIO)
    • 14.6.2 Process-value-proportional dosing (OPEN_PROP)
  • 14.7 Chlorine / Redox Control (CL_ORP)
  • 14.8 Batch Dosing (BATCH)
  • 14.9 Time scheduled Biocide Dosing (BIOCIDE_DOSING)
  • 14.10 Monitoring Process Values (MONITOR_PV)
  • 14.11 Dual Channel Totalizer (TOTALIZER)
• 15 Alarm and Error Messages
  • 15.1 Alarm function
  • 15.2 Displaying (Input-) Alarms and different (Output-) States
  • 15.3 Error Messages and Warnings
• 16 Maintenance and troubleshooting
  • 16.1 Safety Notes
  • 16.2 Maintenance work
  • 16.3 Malfunctions
• 17 Spare parts
• 18 Packing and transport
• 19 Storage
• 20 Disposal
• 21 Appendices
  • 21.1 Project (for example "BW 06")
    • 21.1.1 Input/Output Assignment – project "BW 06"
    • 21.1.2 Wiring Diagram Example for Project "BW 06"
  • 21.2 Power Supply of Actuators/Sensors
    • 21.2.1 Power Supply out of the mxCONTROL
    • 21.2.2 Separate Power Supply
  • 21.3 Hardware Version 1
    • 21.3.1 PIN Assignment for Power Supply Level (Power Supply)
    • 21.3.2 PIN Assignment for Low Voltage Level (Instrumentation Supply)
    • 21.3.3 Connection Examples for Inputs and Outputs
  • 21.4 Hardware version 2
    • 21.4.1 PIN assignment for power supply level (power supply)
    • 21.4.2 PIN Assignment for Low Voltage Level (Instrumentation Supply)
    • 21.4.3 Connection Examples for Inputs and Outputs
  • 21.5 Main Menu Structure – Menu Tree (Example for Project "BW 06T")
    • 21.5.1 Processdata – Inputs – Outputs
    • 21.5.2 Processdata – Cond Control
    • 21.5.3 Configuration of Inputs
    • 21.5.4 Configuration of the Codes
    • 21.5.5 System Settings
    • 21.5.6 Up-/Download - Download
    • 21.5.7 Up-/Download – Upload
    • 21.5.8 Data Logging / Calibration / Clock
  • 21.6 Data Logging File – Example