Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 123)

Screen Examples
117
Stake Out in Remote Mode
Remote Staking Beyond 10 Feet From Target
Remote Staking Between 1 and 10 Feet
Remote Staking Within 1 Foot From Target
Performing stake out in remote mode is
different from running in a non-remote mode
because the feedback is continuous and
provided in the rod’s point of view instead of
the total station’s.
Stakeout data is presented in the Remote
Staking screen. All of the information is
displayed as if the rod person were facing the
total station. The graphic portion of the screen
will change depending on how close the rod is
to the stake point.
When the prism is located more than 10 feet,
or 3 meters from the stake point, the first
screen shown above is displayed. In this
situation, the prism is shown at the center of
the screen and an arrow indicates the
necessary direction of travel, as you face the
total station.
Once the prism moves to within 10 feet of the
total station, the second screen, shown here, is
displayed. The prism location is now at the
center of the screen and the current prism
location is displayed away from the center.
Red “lights” are also displayed in the corners of
the graphic.
When the prism is within 3 feet, or 0.3 meters
of the stake point, the “lights” change to green
and locating the stake point is simply a matter
of moving the round prism icon directly over
the square stake point icon.
When you are satisfied with the location of the
prism, tap the
'RQH button. This will open
the Stake Point screen (see Page 62) where the
stake point can be stored.