Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 361)

Survey Pro Reference Manual
R-204
5HPRYH : removes the selected segment and automatically joins the
previous segments to the following segments.
Note: When a segment is removed the existing segments toward the
centerline will not change. Only those on the side of the removed
segment away from the centerline are adjusted.
Edit Segment
5RDGV (GLW 7HPSODWHV (GLW« ,QVHUW« 
or
5RDGV (GLW 7HPSODWHV (GLW« (GLW« 
or
5RDGV (GLW 7HPSODWHV 1HZ« ,QVHUW« 
The Edit Segment screen is identical to the New
Template screen and is used to create a new template
or edit an existing one.
Segment Name : is the name for the segment. A
name is required, but it does not have to be unique.
Horizontal Distance : is the horizontal length of the
segment.
Slope / V Dist : is the slope of the segment, or the
vertical length, respectively. When defining a vertical distance, select
the
~
D if the segment travels downward, or select
~
U if the segment
travels upward from the point of view of the centerline.
Note: A segment with a negative slope will result in water that flows
from the centerline toward the road edge.