Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 82)

User’s Manual
76
1. Tap
5RDGV , (GLW 7HPSODWHV to open the Add/Edit Templates
screen.
2. Tap
1HZ« to open the New Template screen. The
Cut Slope
and Fill Slope values are the slopes to compute the location of
catch points with the Road Slope Staking routine. These
values can also be easily changed from that routine.
3. Tap
,QVHUW« . This will open the Edit
Segment dialog box. Enter the following
information to define the first segment, which
will be a 20-foot wide roadbed with a -2%
slope.
Segment Name: Roadbed
Horizontal Distance: 20
Slope: -2
4. Tap
2. to return to the New Template
screen where the new roadbed segment
will appear. A list of segments is
displayed. At this point, only the
roadbed and
<End> will be displayed in
the list. Whenever a new template it
inserted, it is inserted above the
template that is selected in this list.
Therefore, to add a new segment to the
end of the last segment,
<End> should be
selected prior to tapping
,QVHUW«.
5. With <End> selected, tap
,QVHUW« and enter
the following data to add a new segment that
will describe the face of a curb. Notice for the
last field, you need to toggle the
6ORSH
button to
9 2IIVHW and select the ~
U radio
button to specify that the curb extends
upward
.
Segment Name: Curb
Horizontal Distance: 0
Vert Dist:
~
U 0.5