Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 99)

DTM Stakeout
93
Stake the DTM
12. With the information correctly entered in the Stake DTM screen,
tap
6ROYH to continue.
13. The DTM Shoot screen will open with a
graphic that shows the DTM boundary,
the reference DTM surface, the
centerline if used, the occupy point, and
backsight direction. Tap the
7DNH 6KRW«
button to take a shot.
14. If a shot is taken when the prism is
located within the boundary (if selected
earlier) the graphic will change and the
Data and Result cards will be filled in.
The graphic will show the current
triangle in the reference DTM surface
where the rod is located and a centerline
and offset, if selected earlier.
15. At anytime, you can view the current
DTM surface computed from the points
staked so far by tapping the
' 9LHZ«
button. The
6WRUH button will store the
last point staked. The
5HVXOW card
displays additional information about the