Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 179)

Survey Pro Reference Manual
R-22
Transfer
)LOH 7UDQVIHU 
The Transfer screen allows you to transfer files
between the data collector and another device
running TDS software.
Connecting to : specifies which device you are
communicating with from the following options:
•
HP48 : if you are connecting to a Hewlett
Packard HP48 calculator.
•
Husky (DOS) : if you are connecting to a
Husky FS-series data collector.
•
Ranger (Windows CE) : if you are connecting to another Ranger
data collector.
•
Windows PC : if you are connecting to a personal computer
that is running Windows CE Services.
•
Geodimeter 600 : if you are connecting to a Geodimeter 600-
series total station running TDS onboard software.
COM Port : specifies which COM port you are using on the local
machine. (COM 1 is the only available serial port on a Ranger.)
Baud Rate : specifies the communications speed. The baud rate must
match in both units for successful communications.
Parity : specifies the parity. The parity must match in both units.
When in doubt, select None here. All transfers are controlled from
the PC when in this special mode.
(QWHU 6HUYHU 0RGH : places the data collector in server mode where all
file transfers are controlled from a PC running either TDS Survey
Link or TDS ForeSight. Tapping
&DQFHO will disconnect server mode.
6HQG )LOH« : will open the Open dialog box where the file that you
want to send can be selected. Once selected, the file is sent from the
data collector to the specified device. A progress bar will be displayed