Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 281)

Survey Pro Reference Manual
R-124
%DFN : returns to the previous screen.
6WDNH &3 ! : opens the next screen.
Slope Staking – Screen Four
The fourth screen is used to perform the actual slope staking shots.
Height of Rod : is the rod height.
;
Coarse EDM (Fast Shot) : When checked, sets
the total station to coarse mode for faster, but
slightly less-precise measurements.
The first button selects the type of slope that will
be used between the catch point and hinge point
from the following options:
• $XWRPDWLF 6ORSH : selects the slope
based on the current rod position. If the
rod is above the hinge point, a cut slope is
computed. If the rod is below the hinge
point, a fill slope is computed.
• )RUFH &87 6ORSH : forces all computations to be based on a
cut slope.
• )RUFH ),// 6ORSH : forces all computations to be based on a
fill slope.
The second button selects which information is displayed in the lower
corner of the screen from the following options:
• 9HUWLFDO 0DS : displays a cross-sectional view at the current
station.
Note: When you tap a map view, an expanded view of the same map
will fill the screen.