Road station and offset – screen two, Alignment card – Spectra Precision Survey Pro CE v3.6 User Manual User Manual
Page 382
Roads Menu
R-225
Road Station and Offset – Screen
Two
The second Road Station and Offset screen is used to take a shot to
the prism and view the data from various cards.
Height of Rod
: is the length of the rod.
;
Coarse EDM (Fast Shot)
: When checked, sets
the total station to coarse mode for faster, but
slightly less-precise measurements.
6KRW : takes a shot to the prism.
%DFN : returns to the previous screen.
6WRUH« : stores the stake point.
Alignment Card
Station
: displays the station at the rod position.
Template
: displays the name of the template that is used at the rod
position.
Segment
: displays the name of the template’s segment at the rod
position.
Elev
: displays the elevation at the rod position.
Offset
Dist
: displays the perpendicular offset from the centerline to
the rod position.
Right
of
Line
/
Left
of
Line
/
On
Line
: displays if the rod position is to
the right of the centerline, left of the centerline, or on the centerline,
respectively.