Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 395)

Survey Pro Reference Manual
R-238
Create Points Screen
-RE (GLW $OLJQPHQWV
Create Points
The Create Points screen is used to store points that coincide with
specific locations on an alignment.
Alignment Nodes : When checked, will store
points at locations where a change occurs on an
alignment, for example where a straight section
and a curved section meet.
Sta. Intervals : When checked, will store a point
at the specified station interval along an
alignment.
Start Point Name : is the name for the first point
that will be stored from this screen.
Description : is the description that will be given
to all the points that are stored from this screen.
Start Location : is the location for the first point, which is the
reference location used to compute the locations of the remaining
points. The default location is the POB defined from the Edit
Alignment screen.