Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 322)

Cogo Menu
R-165
;
Store Pts : When checked, is the first point name that will be used
when storing the computed offset points. Additional points will
automatically be assigned with the next consecutive point name, such
as 8, 9, 10… or Offset, Offset2, Offset3…
Description : is the description that will be assigned to the new points
that are generated or to the new alignment.
6ROYH : computes and stores the new offset points and polyline.
Offset Points
&RJR 2IIVHW 3RLQWV 
The Offset Points screen is used to store points at a specified
perpendicular offset to an existing polyline, alignment, or point
range. Points can be stored that correspond with the nodes of an
alignment, points of a polyline, and/or at a specified station interval.
7DS /LQH« : allows you to tap an existing
polyline or alignment that the offset points will
be computed from.
7R)URP« : allows you to enter a range of
points that define the line where the offset will
be computed from.
Offset : defines the offset distance and which
side the offset occurs. The right or left side is
referenced from the first point that defines the
selected line.
;
Store Pts : When checked, will store the offset points that are
computed based on the selected line and which of the two following
checkboxes are checked.