Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 268)

Stakeout Menu
R-111
Stake List of Points Screen
6WDNHRXW 6WDNH /LVW RI 3RLQWV 
The Stake List of Points screen is used to stake points from a
specified list of points. Points can also be selected by description or
polyline.
6HWWLQJV : located at the top of the screen,
accesses the Stakeout Settings screen (Page R-
33).
7DS 3RLQWV« : displays a map of the current job.
Simply tap the points that you want to stake
and then tap
2..
7R)URP« : opens a window where a range of
points can be defined. The points within the
specified range can then be staked.
: Allows you to select points using a variety of
other methods including: select all points; all control points; all non-
control points; by description; or by polyline.
Design Point : displays the point to be staked. The initial Design
Point is the first point of the selected polyline or point range.
&KDQJH« : opens the Edit Point List screen where the current point
list can be edited.
Increment : is the number of points to advance from the Design Point
after tapping
1H[W 3RLQW ! . (A negative integer can be entered to
have point numbers advance in descending order.)
Height of Rod : is the length of the rod.
1H[W 3RLQW ! : Advances the
Design Point by the Increment and
automatically solves to open the Stake List of Points screen where
you can begin staking the point. The points are advanced in the same
order that they were defined when the polyline was created or when
the point range was defined.
%DFNVLJKW« : accesses the Backsight Setup screen (Page R-72).