Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 85)

Road Layout
79
6. Enter the following data then tap
2.:
North: 5000
East: 5000
Elev: 100
Start Station: 0+00
7. The next step is to add the templates.
We will use the template created earlier
to define both sides of the road. Tap the
7HPSODWHV tab.
8. With <End> selected in the L eft column,
tap the
$GG« button. This opens the Add Left Template screen,
which allows you to add a template to the left side of the road.
9. All the available templates will be displayed in the Template
column. Select the T1 template, created earlier.
10. Since we will use this template for both
sides of the road, check the
;
Mirror to
Right checkbox and tap
2.. We now
have the minimum number of
components to completely define a road:
an alignment, and a left and right
template.
11. Tap
&KHFN« to confirm that the road is
okay. You should get a message stating
success.
Note: once templates have been added, you can return to the Road
card and tap the
9LHZ 3URILOHV« button to view the cross-sectional
profile of the road at any station.