Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 207)

Survey Pro Reference Manual
R-50
Edit Alignment Screen – VAL Tab
The VAL ( V ertical AL ignment) tab in the Edit
Alignment screen is used to enter or modify only
the vertical details of an alignment.
Note: The total horizontal length of the VAL
must be equal to or greater than the total
horizontal length of the HAL when the
alignment is used for road layout.
,QVHUW« : opens the Edit Segment screen where
a new vertical segment can be inserted prior to the selected segment.
(GLW« : opens the Edit Segment screen where the selected vertical
segment can be modified.
5HPRYH : removes the selected segment and automatically joins the
next segment with the previous segment.
Note: The station and elevation at the beginning of the selected
vertical segment are displayed at the bottom of the screen.
Edit Alignment Screen – POB Tab
The POB ( P oint O f B eginning) tab in the Edit
Alignment screen is used to define the starting
location of the alignment. The first horizontal
and vertical segment will always begin at this
location.
/RFDWLRQ : the starting location for the
horizontal and vertical alignments will be at the
specified
North , East and Elev coordinates.
3RLQW : the starting location for the horizontal
and vertical alignments will be at the specified
Point .