Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 298)

Stakeout Menu
R-141
Store Offset Points
6WDNHRXW 6WRUH 2IIVHW 3RLQWV 
The Store Offset Points screen is used to store points in the current
job at a specified offset from an existing polyline or alignment at a
specified interval.
7DS /LQH« : allows you to tap an existing
polyline or alignment that the station and offset
will be computed from.
7R)URP« : allows you to enter a range of points
that define the line where the station and offset
will be computed from.
Begin Station : is the station assigned to the
beginning of the line.
1H[W ! : takes you to the next Store Offset
Points screen where the slope staking
parameters are set up.
Store Offset Points – Screen Two
The second Store Offset Points screen is used to
define the road profile, or offset distances that
will be used to compute the offset point
coordinates.
1/2 Road Width : is the L eft and R ight width of
the road, respectively, from the centerline to the
edge of payment.
X-Slope (%) : is the L eft and R ight slope of the
road, respectively, from the centerline to the edge
of payment calculated from 100
Run
Rise
⋅ .