Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 61)

Fieldwork
55
g. Tap
6ROYH . The Map screen will open automatically.
h. Tap
&ORVH to continue.
Performing a Side Shot
5. Access the
6XUYH\ , 7UDYHUVH  6LGHVKRW screen and fill in the
appropriate fields. The backsight information is displayed at the
top of the screen. At this point, it is assumed that your total
station is over the occupy point and its horizontal angle was
zeroed while aiming toward the backsight.
a. In the Traverse / Sideshot screen, enter
the following data:
Foresight : 3
Description : SS
HR : 5
These values will define the point name,
description, and rod height for the next
point that is stored.
b. Assuming that the total station is
aiming toward the prism, which is
located over the foresight, tap
6LGH 6KRW . This would trigger the total station to take a shot,
compute coordinates for the new point and store it. Since we
are running in manual mode, we will enter the shot data from
the keypad.
c. Enter the following data:
Angle Right : 70
Zenith : 90
Slope Dist : 100
and then tap
2. . The new point is
computed and stored. The Foresight point
will automatically advance to the next
available point name and the information from the last shot is
displayed on the screen.