Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 216)

Job Menu
R-59
Raw Data Note
Enter any note to append to the raw data file.
You can use the buttons to insert common line
work commands.
When finished, tap
:ULWH 1RZ to append the
note to the end of the raw data file.
View DTM
-RE 9LHZ '70 
Before viewing a DTM, the Setup DTM 3D screen will open where the
DTM layers must be defined. This screen is also used to define other
parameters for the DTM.
/D\HUV : opens the Layers for Staking DTM
screen where the DTM layers are selected.
%RXQGDU\ : opens the Choose Polyline screen
where a polyline can be selected that defines the
boundary of the DTM.
Exclude points… : will move any points that
exist outside the selected boundary to the
Auxiliary layer. If a point is later stored outside
the boundary, they will also be moved to the
Auxiliary layer.
Discard the boundary… : will initially move any
points that exist outside the boundary to the Auxiliary layer. If a
point is later stored outside the boundary, the selected boundary is
automatically unselected.