Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 291)

Survey Pro Reference Manual
R-134
%DFN : returns to the previous screen.
6WDNH ! : accesses the next screen, which is identical to the third
Stake Points screen, described on Page R-108.
Screen Summary
Screen One is used to define the primary curve used to determine the
location of the curve to be staked and the station associated with the
PC Point.
Screen Two is used to define the offset distance and location, the
station to be staked and the station interval.
Screen Three provides the distance and direction information to the
current station to be staked from the occupy point.
Screen Four is used to stake the current station.
Stake Out Point (Tape Offset) Dialog
Box
The Store Point (Tape Offset) dialog box allows you to store a point at
a specified offset from the stake point, resulting in a point that is
either closer to, or further away from the total
station.
Point : is the name assigned to the new offset point.
Description : is the description assigned to the new
offset point.
Tape Out/Tape In : is the specified offset from the
stake point. A positive value will result in a new
point that is further away from the total station. The default value is
the appropriate distance correction to the design point.
2. : stores the new offset point.