Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 327)

Survey Pro Reference Manual
R-170
Map Check
&RJR 0DS &KHFN 
The Map Check screen is used to manually enter boundaries from a
map to check for closure and other information related to the
boundary.
(GLW« : accesses the appropriate editor screen
where you can edit the selected line or curve
from the list.
'HOHWH : deletes the selected line segment.
&OHDU : clears all line entries.
&ORVXUH : accesses the
Results page.
$GG /LQH« : accesses the Add / Edit Line screen,
(Page R-171), where a new line can be added
prior to the select segment.
$GG $UF« : accesses the Add / Edit Curve screen (Page R-171) where
a new curve can be added prior to the selected segment.
$GG WR 0DS« : accesses the Add to Map screen (Page R-172) where
the map data entered in the list can be added to the current job as a
polyline.
Results
Area : is the area that the boundary encloses. If the start and end
points are in different locations, the area is computed as if a line
joined these two points.
Length : is the length of the boundary from the first point to the last
point.
Perimeter : is the length of the boundary from the first point to the
last point, plus any additional length between the last point and the
first point.