Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 280)

Stakeout Menu
R-123
;
Stake Curb / Ditch : When checked, this allows you to include a
curb or ditch in the road profile.
Height : defines the height of the curb, or depth of the ditch. (A
negative value would be used to define the depth of a ditch.)
Offset From Edge of Road : defines the width of the curb or ditch.
%DFN : returns to the previous screen.
1H[W ! : opens the next screen.
Slope Staking – Screen Three
Station to Stake : is the station that will be
staked next.
Station Interval : is the value that is added to the
Station to Stake after the
1H[W 6WDWLRQ button is
pressed.
1H[W 6WDWLRQ : advances the
Station to Stake by
the Station Interval .
Note: If the Stake Corners option is selected in the Stakeout Settings
screen, the
1H[W 6WDWLRQ button will also stop at any horizontal or
vertical alignment node that falls within the interval.
Fill Slope : is the desired slope, calculated from rise over run, between
the hinge point and catch point when the area requires a fill.
Cut Slope : is the desired slope, calculated from rise over run, between
the hinge point and catch point when the area requires a cut.
Segment # (Fill HP) : when the terrain requires a fill, you have the
option to compute the hinge point from either side of the second
segment. The option to use segment # 1 can simplify the situation
where a ditch meets an area requiring a fill, which would otherwise
result in an area with two similar or identical negative slopes.